| 招标
（招标编号： DDEGS-HW-BJSTSDXMB-025-2021-008 ） 招标项目所在地区： 巴基斯坦拉合尔 一、招标条件 巴基斯坦ADB-401A输电线路项目（招标 二、项目概况和招标范围 项目规模：从 Suki Kinari 水电站到现有 Neelum Jhelum 500kV 双回路四线束输 电线路的互连点的 500kV 双回路四线束输电线路的设计，制造，供应，安装，测试和调试（ 约 75 公里） 招标内容与范围： No. Description Unit Qty. Estimated Spare 1 Insulator Hardware Assemblies 1.1 Single 'V' String suspension assemblies type "VSB(4)" for 240 kN E&M Strength insulators (excluding insulators) for double circuit tower type 'SDS' as per specification drawing No. 4029/TD/169/01E201 set 158 36 1.2 Double 'V' String suspension assemblies type "DVSB(4)" for 160 kN E&M Strength insulators (excluding insulators) for double circuit tower type 'SDL' as per specification drawing No. 4029/TD/169/01E202 set 36 12 1.3 Single 'V' String suspension assemblies type "VJB(4)" for 160 kN E&M Strength insulators (excluding insulators) for double circuit tower types 'SDL', 'SDM' & 'SDD' as per specification drawing No. 4029/TD/169/01E203 set 1221 144 1.4 Singe ‘I’ String jumper assembly type ‘IJB (4)’ for 160 kN E&M Strength insulators (excluding insulators) for double circuit tower types “SDL”, “SDM” and “SDD” as per drawing no. 4029/TD/169/01E203a set 100 10 1.5 Quad String Dead End assemblies for quad bundle type "4DEB(4)" for double circuit tower types 'SDL', 'SDM' & 'SDD' complete for 240 kN E&M Strength insulators (excluding insulators) as per specification drawing No. 4029/TD/169/01E204 set 1122 29 1.6 Triple String Dead End assemblies for quad bundle type "3DEB(4)" for double circuit tower types 'SDL', 'SDM' & 'SDD' complete for 240 kN E&M Strength insulators (excluding insulators) as per specification drawing No. 4029/TD/169/01E204a set 1346 288 1.7 Double String Dead End assemblies for quad bundle "GDEB(4)" complete for 240 kN E&M Strength insulators (excluding insulators) for gantry side in gantry span as per specification drawing No. 4029/TD/169/01E205 set 6 6 1.8 Triple String Dead End assemblies type "TDEB(4)" for 240 kN E&M Strength insulators for quad bundle configuration with additional extension link 3.5m for tower type 'SDT' as per specification drawing No. 4029/TD/169/01E206 set 8 1.9 Single 'I' String transposition assemblies type "TIUB(4)" for 160kN E&M strength insulators as per drawing No. 4029/TD/169/01E207 set 8 1.10 Single 'I' String transposition assemblies type "TIIB(4)" for 160kN E&M strength insulators as per drawing No. 4029/TD/169/01E208 set 8 1.11 Double 'V' Pipe Jumper assembly type "TVJB(4)" for 160kN E&M strength insulators as per drawing No. 4029/TD/169/01E209 set 8 2 Hardware for OPGW 2.1 Suspension assembly for OPGW including AGS clamp for double circuit tower type 'SDS' as per specification drawing No. 4029/TD/169/01E210 set 26 6 2.2 Double tension set for jointing of OPGW on suspension tower as per specification drawing No. 4029/TD/169/01E211 set 5 1 2.3 Double tension set for jointing / non jointing of OPGW on tension towers as per specification drawing No. 4029/TD/169/01E212 set 209 24 3 Hardware for Aluminum Clad Steel Shieldwire 3.1 Overhead shieldwire suspension assembly as per specification drawing No. 4029/TD/169/01E213 set 26 6 3.2 Overhead shieldwire tension assembly as per specification drawing No. 4029/TD/169/01E214 set 206 24 4 Accessories and Dampers 4.1 Conductor compression splice (pre-filled with appropriate filler compound) for 1192.5 kcmil ACSR "Bunting" Conductor set 311 20 4.2 Conductor repair sleeve for 1192.5 KCM ACSR "Bunting" Conductor set 350 100 4.3 Conductor Dead-End splice (pre-filled with appropriate filler compound) incl. jumpers dead end terminal pads for 1192.5 kcmil ACSR "Bunting" Conductor set 5700 139 4.4 Shieldwire compression splice for 12.34mm dia, Aluminum Clad overhead shieldwire set 33 5 4.5 Spacer Damper for 1192.5 kcmil ACSR "Bunting" Conductor set 12500 270 4.6 Stock bridge vibration dampers for 1192.5 kcmil ACSR "Bunting" Conductor set 100 4.7 Stock bridge vibration dampers for OPGW set 464 60 4.8 Stock bridge vibration dampers for Aluminum Clad shieldwire set 464 60 4.9 Spacers for 1192.5 kcmil ACSR "Bunting" Conductor in Quad Bundle with 457mm spacing set 4900 576 4.10 Repair sleeve for OPGW set 17 5 Joint boxes for OPGW 5.1 OPGW-OPGW (A Type) set 45 5 5.2 OPGW-OPGW Cable ( B Type) set 4 5.3 OPGW-attaching Clamps set 1350 150 5.4 Cable margin supporter on tower for OPGW set 49 具体技术要求见技术规范书。 三、投标人资格要求 3.1 投标人应具备下列条件: 3.1.1 具有独立订立合同的法人资格。 3.1.2 在专业技术、设备设施、人员组织、业绩经验等方面具有设计、制造、质量控制、经营管理的相应的资格和能力。 3.1.3 具有完善的质量保证体系。 3.1.4 业绩 3.1.4.1投标人应是国家电力、机械行业有关部门认定的具有制造、经营招标货物资格的、至少2台（套）及3年以上良好运行业绩的物资供应商或制造厂商； 3.1.4.2投标货物要满足技术先进、安全可靠的要求和本招标文件附件三的技术规范。投标货物的性能和质量由投标方对招标人进行保证。 3.1.4.3具有良好的银行资信和商业信誉, 没有处于被责令停业，财产被接管、冻结及破产状态。 3.2.投标人要求 请投标人如实填写下列表格： 单位全称 法定代表人 通讯 邮政编码 账 号 本次投标 没有在 中国电力招标采购网（www.dlztb.com）上注册会员的单位应先点击注册。登录成功后根据招标公告的相应说明获取招标文件！ 联系人：李杨 打赏 更多>同类资讯
最新资讯
最新行情
建设项目网-建设招标网www.zgdlzb.org
|
